Tripod flat roof mounting bracket
CR06-2 is tripod structure made of HDG Steel. As a traditional flat roof mounting system, It can be fixed on roof top by ballasted block or expansion bolts. The orientation of the panels can be landscape or portrait. The tripod structure will be pre-assemblied at factory, it saves a lot of installation time.
Components List
|
|
|
|
|
|
End clamp |
Mid clamp |
Rail |
Rail fastener |
|
|
|
|
|
|
Rail splice |
Tripod structure |
|
|
Feature
|
Installation site |
Flat concrete rooftop |
|
Material |
HDG steel, Anodized Aluminum |
|
Foundation |
Ballasted or expansion bolt |
|
Tilt angle |
0 ~45 degrees |
|
Panel array |
Customized |
|
Wind load |
Up to 60m/s |
|
Snow load |
Up to 1.4 KN/M2 |
|
Standards |
ASCE7-10; EN 1990:2002/A1:2005 Eurocode;AS 1170 |
|
Warranty |
15 years |
CR06-2 is tripod structure made of HDG Steel. As a traditional flat roof mounting system, It can be fixed on roof top by ballasted block or expansion bolts. The orientation of the panels can be landscape or portrait. The tripod structure will be pre-assemblied at factory, it saves a lot of installation time.
Components List
|
|
|
|
|
|
End clamp |
Mid clamp |
Rail |
Rail fastener |
|
|
|
|
|
|
Rail splice |
Tripod structure |
|
|
Feature
|
Installation site |
Flat concrete rooftop |
|
Material |
HDG steel, Anodized Aluminum |
|
Foundation |
Ballasted or expansion bolt |
|
Tilt angle |
0 ~45 degrees |
|
Panel array |
Customized |
|
Wind load |
Up to 60m/s |
|
Snow load |
Up to 1.4 KN/M2 |
|
Standards |
ASCE7-10; EN 1990:2002/A1:2005 Eurocode;AS 1170 |
|
Warranty |
15 years |